Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50 is a genuine double-acting standard air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50
The B06-SC32X50 is an AirTAC double-acting tie-rod pneumatic cylinder. The B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the standard SC32X50. It delivers 402 N of push force at 0.5 MPa, making it well-suited for compact positioning tasks in cell stacking and module handling.
This 32 mm bore, 50 mm stroke unit features a 12 mm piston rod, PT1/8 ports, and 21 mm adjustable cushions. With a body length A of 140 mm, the total extended length is 190 mm. It operates on filtered air between 0.15 and 1.0 MPa at speeds of 30-800 mm/s.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50 Is Used
Cell Stacking
Provides the precise 402 N push force at 0.5 MPa needed to align and press prismatic battery cells into stacking fixtures.
Tab Welding Press
Uses its 50 mm stroke to lower welding heads onto battery module busbars with consistent pressure.
Module Handling
Actuates small pushers and diverters on conveyor lines moving battery packs through assembly stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50 the Right Cylinder?
For slightly higher force requirements, stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. Conversely, if footprint is tight, verify if a smaller frame can handle the load. At 50 mm stroke, side-load bending is minimal, but always ensure the load is axially aligned to prevent premature rod seal wear.
When specifying a replacement, match these five points exactly: 32 mm bore, 50 mm stroke, PT1/8 port thread, basic mounting (no bracket), and no magnet. This SC tie-rod cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with it.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50 FAQ
The B06- prefix designates this as a cylinder dedicated to battery-manufacturing lines. Mechanically and dimensionally, the B06-SC32X50 is identical to the standard AirTAC SC32X50, offering the same 32 mm bore, 50 mm stroke, and 402 N push force at 0.5 MPa.
No, the SC series is a double-acting air cylinder and cannot hold position without live air pressure. The adjustable cushion only decelerates the piston near the stroke end to reduce impact; a mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.