Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500 is a genuine double-acting standard air cylinder with a Ø32mm bore and 500mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke500 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500
The B06-SC32X500 is an AirTAC double-acting tie-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SC32X500. Mechanically identical to the base model, it delivers a push force of 402 N at 0.5 MPa and a pull force of 345 N.
Featuring a 32 mm bore, 12 mm rod, and a 500 mm stroke, this unit operates at speeds of 30-800 mm/s. It includes adjustable cushions measuring 21 mm to decelerate the piston at stroke ends, and has a body length A of 140 mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500 Is Used
Cell Stacking Presses
Applies consistent 402 N push force at 0.5 MPa for aligning and stacking prismatic battery cells during module assembly.
Tab Handling & Sorting
Drives 500 mm stroke movements to transfer battery tabs or separators between processing stations on the production line.
Pack Palletizing
Acts as a pusher or diverter on conveyors to route finished battery packs into testing or packaging zones.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500 the Right Cylinder?
This 32 mm bore cylinder provides 402 N of push force at 0.5 MPa. If your battery stacking or handling application requires less force, consider dropping to a smaller bore, or step up to the 40 mm bore (628 N push at 0.5 MPa) for heavier pack manipulation. For a direct replacement, match the 32 mm bore, 500 mm stroke, PT port thread, basic mounting, and no magnet.
Because this model features a 500 mm stroke, the extended 12 mm rod is susceptible to bending under side loads. For battery cell handling and alignment tasks, use an external guide rail or a guided cylinder to prevent rod bearing damage and ensure precise movement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard AirTAC SC32X500, offering the same 32 mm bore, 500 mm stroke, and 402 N push force at 0.5 MPa, but is designated for battery cell, module, and pack assembly lines.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston near the stroke end. For vertical battery handling applications, you must use an external mechanical lock, rod brake, or pilot-operated check valve to prevent dropping.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.