Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S is a genuine double-acting standard air cylinder with a Ø32mm bore and 500mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke500 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S
The B06-SC32X500S is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC32X500S, meaning it is mechanically identical to the base model with a 32mm bore and 500mm stroke. It delivers 402N of push force at 0.5 MPa and features a 12mm piston rod.
Equipped with a built-in magnet (-S), this unit supports CMSG, DMSG, or EMSG sensors for position detection during cell stacking or handling. It operates on filtered air at 0.15-1.0 MPa and uses adjustable cushions with a 21mm length to decelerate the piston at stroke ends, ensuring smooth operation in automated assembly equipment.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S Is Used
Cell Stacking
Drives the precise linear movement required for stacking battery cells in module assembly, using the magnetic piston for end-of-stroke confirmation.
Module Handling
Pushes or positions battery modules along conveyor lines, leveraging its 402N push force at 0.5 MPa to move moderate loads reliably.
Tab Welding Press
Actuates welding heads for battery tab attachment, where the adjustable 21mm cushion softens impact at the end of the 500mm travel.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S the Right Cylinder?
This 32mm bore generates 402N push and 345N pull at 0.5 MPa. If your battery handling system requires less force, stepping down is not an option below 32mm in this family, but stepping up to a 40mm bore yields 628N push at 0.5 MPa for heavier pack manipulation. The 500mm stroke is the maximum standard stroke for a 32mm bore.
Because this model features a 500mm stroke, the 12mm rod is susceptible to bending under side loads. For battery tab welding or stacking processes that generate lateral forces, use an external guide rail or a guided cylinder to prevent rod bearing wear. When replacing this unit, match the 32mm bore, 500mm stroke, PT1/8 port thread, basic mounting, and the -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery manufacturing applications. Mechanically, it is identical to the standard SC32X500S, featuring the same 32mm bore, 500mm stroke, 12mm rod, and built-in magnet.
At the maximum operating pressure of 0.9 MPa, this 32mm bore cylinder provides a push thrust of 724N. At 0.5 MPa, the push force is 402N and the pull force is 345N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X500S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.