Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S is a genuine double-acting standard air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S
The B06-SC32X75S is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the SC32X75S, meaning it is mechanically identical to the standard model but tailored for cell, module, and pack assembly applications. It features a 32mm bore and a 75mm stroke.
Delivering 563N of push force at 0.7MPa, this unit is equipped with a built-in magnet for precise position sensing via CMSG or DMSG sensors. It uses a 12mm piston rod, a PT1/8 port, and includes 21mm adjustable cushions to decelerate the piston smoothly at stroke ends. The standard TPU seals support an operating temperature range of -20 to +70C.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S Is Used
Cell Stacking
Precisely pushes and aligns battery cells during automated stacking processes with 563N force at 0.7MPa.
Module Handling
Actuates clamps and positioning stops for battery module assembly, using the built-in magnet for stroke confirmation.
Pack Routing
Diverts or stops battery packs on conveyors, relying on the 21mm adjustable cushions to prevent end-of-stroke impact damage.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S the Right Cylinder?
This 32mm bore generates 402N push force at 0.5MPa. If your battery stacking or handling process requires less force, stepping down is not an option below 32mm in this family, but stepping up to a 40mm bore yields 628N at 0.5MPa for heavier pack manipulation. The 75mm stroke is compact, keeping the total extended length to approximately 215mm (140mm body length A plus stroke), which easily fits into tight assembly fixtures.
When replacing this cylinder, match these five points exactly: 32mm bore, 75mm stroke, PT1/8 port thread, basic mounting (no bracket), and the built-in magnet (-S). Because the stroke is under 300mm, side-load bending stress on the 12mm rod is minimal, but always ensure the load is axially aligned to maximize bearing life. Remember that an air cylinder does not hold position if air pressure is lost; a mechanical lock is required for vertical battery cell holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC32X75S, offering the same 32mm bore, 75mm stroke, and 563N push force at 0.7MPa, but is designated for battery industry applications.
No, the B06-SC32X75S is a double-acting air cylinder and will drift or drop if air pressure is lost or the valve is centered. The 21mm adjustable cushion only decelerates the piston at stroke ends; it does not act as a brake. A mechanical lock or external rod brake is required to hold vertical loads safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.