Airtac SAI32 Standard Cylinder SAI32AX50S
The AirTAC SAI32 Standard Cylinder SAI32AX50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32AX50S
The AirTAC SAI32X50-S is a double-acting ISO 15552 profile cylinder engineered for compact automation. Delivering a push force of 402 N at 0.5 MPa, this 32 mm bore unit is tailored for short 50 mm strokes where rapid, repeatable movements are essential. The extruded aluminum barrel design omits tie-rods, providing a clean exterior that drops directly into standard ISO 15552 mounting footprints.
This specific configuration includes a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance over standard carbon steel. Equipped with a magnetic piston (-S), it supports direct mounting of CMSE or DMSE series sensor switches in the dual side grooves. Fluid ports utilize a PT tapered thread type, ensuring robust pneumatic sealing in demanding industrial environments.
Airtac SAI32 Standard Cylinder SAI32AX50S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32AX50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32AX50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32AX50S Is Used
Component Clamping
Ideal for securing small machined parts during secondary milling or drilling operations, utilizing its 402 N push force to hold firmly against cutting resistance.
Package Diverting
Executes rapid 50 mm strokes to push lightweight cartons or products off a main conveyor belt into secondary packaging lanes.
Valve Actuation
Provides dependable linear thrust to pilot mechanical valves or open/close small process gates in localized machinery control panels.
Is the Airtac SAI32 Standard Cylinder SAI32AX50S the Right Cylinder?
Selecting the SAI32X50-S is optimal when your application requires precise point-to-point moves within a 50 mm range. If the 402 N thrust at 0.5 MPa is insufficient for your load, stepping up to the 40 mm bore variant increases that output to 628 N. Because this is a standard double-acting cylinder, it relies on continuous air pressure to maintain position; the integrated adjustable air cushions only decelerate the piston at stroke ends and will not hold a load if air is exhausted. For any requirement to lock position mechanically upon pressure loss, specify the SAIL or BSAI variant instead.
When replacing an existing ISO 15552 cylinder, match the 32 mm bore, 50 mm stroke, and PT G1/8 port size. You can utilize standard SAI mounting accessories like LB foot brackets or FA flanges, and the included magnet ensures immediate compatibility with reed or solid-state switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32AX50S FAQ
At a standard operating pressure of 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. If pressure is increased to 0.7 MPa, the push force rises to 563 N.
Yes, the SAI32X50-S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders of the same bore and stroke, provided you match the G1/8 port and mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32AX50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.