Airtac SAI32 Standard Cylinder SAI32BX110S
The AirTAC SAI32 Standard Cylinder SAI32BX110S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32BX110S
The AirTAC SAI32X110-S is a double-acting ISO 15552 profile cylinder engineered for compact, standardized automation. Delivering a push force of 402 N at 0.5 MPa, this 32 mm bore unit is tailored for lighter-duty handling tasks. The 110 mm stroke provides ample extension for gating, clamping, and short-transfer operations.
This specific configuration features a SUS304 stainless steel piston rod (material code B) for superior corrosion resistance in washdown or mildly chemical environments. It includes a built-in magnet (-S) for seamless integration with CMSE or DMSE reed switches along the dual sensor grooves. Fluid connections use a PT tapered thread at the G1/8 port.
Airtac SAI32 Standard Cylinder SAI32BX110S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32BX110S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32BX110S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32BX110S Is Used
Small Part Ejection
Provides the precise 402 N push at 0.5 MPa needed to eject small molded components from a fixture without damaging the product.
Packaging Diverter
Uses the 110 mm stroke and SUS304 rod to reliably divert small cartons on a washdown packaging line, resisting moisture and corrosion.
Clamp Actuation
Actuates a lightweight machining clamp securely, utilizing the adjustable air cushions at both ends to prevent end-cap impact.
Is the Airtac SAI32 Standard Cylinder SAI32BX110S the Right Cylinder?
Selecting this 32 mm bore makes sense when application loads hover around 400 N; stepping up to the 40 mm bore yields 628 N at 0.5 MPa if your payload increases. Because this model features a 110 mm stroke, side-load stress on the rod bearing is minimal, but always ensure the load is axially aligned to maximize seal life.
Being dimensionally interchangeable per ISO 15552, this cylinder serves as a direct replacement for other ISO 15552 profile cylinders. To replicate this exact unit, specify a 32 mm bore, 110 mm stroke, PT port thread, SUS304 rod, and the -S magnet option. Note that standard air cushions only decelerate the piston near stroke end; if the air supply is lost, the rod will drift. Use an external pilot-operated check valve for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32BX110S FAQ
At a 0.5 MPa operating pressure, this 32 mm bore cylinder generates a push force of 402 N and a pull force of 345 N. If pressure is increased to 0.7 MPa, the push force rises to 563 N.
Yes. The SAI32X110-S is a genuine ISO 15552 profile cylinder, meaning its mounting dimensions are fully interchangeable with other ISO 15552 cylinders, allowing for direct replacement without modifying your machine plate.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32BX110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.