Airtac SAI32 Standard Cylinder SAI32BX700
The AirTAC SAI32 Standard Cylinder SAI32BX700 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32BX700
The AirTAC SAI32X700 is a double-acting ISO 15552 profile cylinder engineered for long-stroke automation tasks. Delivering a push force of 563 N at 0.7 MPa, this 32 mm bore unit utilizes a 700 mm stroke to precisely actuate distant mechanisms without requiring intermediate transitions.
Built with a SUS304 stainless steel piston rod, it provides superior corrosion resistance compared to standard carbon steel. The barrel features sensor grooves on both sides for flexible CMSE or DMSE switch mounting, though a magnet (-S) is required for magnetic sensing.
Airtac SAI32 Standard Cylinder SAI32BX700 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32BX700 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32BX700
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32BX700 Is Used
Material Transfer
Pushes products between distant conveyor lanes across a 700 mm gap using 563 N of force at 0.7 MPa.
Long-Reach Sorting
Actuates sorting arms at the end of packaging lines where a 32 mm bore provides adequate thrust without excessive bulk.
Remote Tool Actuation
Extends tooling heads into hard-to-reach machine zones, relying on the SUS304 rod for environmental resilience.
Is the Airtac SAI32 Standard Cylinder SAI32BX700 the Right Cylinder?
Selecting this 700 mm stroke model requires careful attention to mechanical guidance. At this extension length, the piston rod is highly susceptible to bending under side loads; always pair it with an external linear guide or use a dedicated guided cylinder to prevent rod-bearing damage. For applications needing less reach, the SAI32X500 offers a shorter standard stroke.
If your machinery loses air pressure, this standard cylinder cannot hold its load and will drift; integrate an external pilot-operated check valve for position holding. This SAI32X700 is dimensionally interchangeable per ISO 15552, featuring a PT tapered port, and supports standard mountings like FA flange or LB foot brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32BX700 FAQ
At an operating pressure of 0.7 MPa, the SAI32X700 generates a push force of 563 N and a pull force of 345 N at 0.5 MPa.
Yes, the SAI32X700 adheres strictly to ISO 15552 mounting dimensions, making it a direct replacement for other ISO 15552 profile cylinders with matching 32 mm bore and PT port specifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32BX700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.