Airtac SAI32 Standard Cylinder SAI32BX800S
The AirTAC SAI32 Standard Cylinder SAI32BX800S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke800 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32BX800S
The AirTAC SAI32X800-S is a double-acting ISO 15552 profile cylinder engineered for long-reach linear motion. It generates 563 N of push force at 0.7 MPa, making it well-suited for moving lighter loads over an 800 mm extension. As a standardized profile barrel design, it provides a direct replacement for any ISO 15552 cylinder without requiring custom mounting brackets.
This specific configuration includes a SUS304 stainless steel piston rod for superior corrosion resistance and a built-in magnet (-S) for position sensing. The extruded aluminum barrel features sensor grooves on both sides, allowing you to easily mount CMSE or DMSE reed switches anywhere along the 800 mm travel path.
Airtac SAI32 Standard Cylinder SAI32BX800S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32BX800S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32BX800S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32BX800S Is Used
Long-Reach Diversion
Extends 800 mm to push lightweight product packages off a main conveyor belt into a secondary sorting lane.
High-Bay Ejection
Actuates a long-stroke ejection arm to push stored totes from deep shelving racks onto a pickup roller table.
Film Roll Transfer
Deploys a SUS304 rod to transfer delicate packaging film rolls across an 800 mm gap without marring the surface.
Is the Airtac SAI32 Standard Cylinder SAI32BX800S the Right Cylinder?
Choose this 32 mm bore when you need significant extension length but only moderate thrust; if your application requires more push force, stepping up to the 40 mm bore yields 879 N at 0.7 MPa. Because this model features an 800 mm stroke, the extended piston rod is highly susceptible to bending under side loads. You must use an external guide rail or a dedicated guided cylinder to prevent rod-bearing damage and premature seal wear.
For ISO 15552 interchangeability, match the 32 mm bore, 800 mm stroke, PT G1/8 port, and your required mounting accessory (such as LB foot or TC trunnion). Note that the adjustable air cushions at both ends decelerate the piston near stroke limits but do not hold the load; if air pressure is lost, the rod will drift. Use the SAIL variant with an air-released lock if you need static position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32BX800S FAQ
At an operating pressure of 0.7 MPa, this 32 mm bore cylinder provides a push force of 563 N and a pull force of 345 N at 0.5 MPa.
Yes. The SAI32X800-S is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders of the same bore and stroke, provided you match the G1/8 port and mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32BX800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.