
The AirTAC SAI32 Standard Cylinder SAI32X155 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X155 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and 155mm stroke. It delivers a push force of 402 N and a pull force of 345 N at 0.5 MPa, making it well-suited for compact automation tasks requiring moderate thrust over a mid-range travel distance. The extruded aluminum barrel design omits tie-rods, providing a clean exterior that simplifies cleaning and sensor mounting.
This standard configuration utilizes a carbon steel piston rod and PT tapered port threads. Without a built-in magnet, it is optimized for purely mechanical actuation, though the barrel retains dual-side sensor grooves should you later need to track position. For higher temperature environments, the standard TPU seals can be swapped for Viton (H) or NBR (N) options.
| Model | Airtac SAI32 Standard Cylinder SAI32X155 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides reliable 402 N clamping force at 0.5 MPa for securing lightweight machined components during secondary milling operations.
Actuates a diverter arm with its 155mm stroke to route small to medium parcels on a material handling line.
Pushes finished molded parts out of a press area quickly and efficiently within the 30-800 mm/s speed range.
Stepping up to the 40mm bore neighbor increases the 0.5 MPa push force to 628 N, whereas dropping below 32mm is not standard in this series. At 155mm, this stroke is safely within the 1000mm maximum for this bore, meaning side-load risks are minimal but still warrant standard alignment practices. If your mechanism loses air pressure, this cylinder will not hold its load and the rod will drift; for position-holding safety, consider the SAIL variant with an air-released lock. As a dimensionally interchangeable ISO 15552 unit, replacement requires matching the 32mm bore, 155mm stroke, G1/8 port, and your chosen mounting accessory like an LB foot or FA flange.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At 0.5 MPa operating pressure, the SAI32X155 generates a push force of 402 N and a pull force of 345 N. At 0.7 MPa, the push force increases to 563 N.
Yes, the SAI32X155 is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders with a 32mm bore, 155mm stroke, and G1/8 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.