Airtac SAI32 Standard Cylinder SAI32X210
The AirTAC SAI32 Standard Cylinder SAI32X210 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X210
The AirTAC SAI32X210 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and a 210mm stroke. It provides a push force of 563N at 0.7 MPa, making it well-suited for precise medium-duty handling tasks. The extruded aluminum barrel design omits tie rods, presenting a clean exterior.
For environments requiring heat resistance, you can specify Viton (H) seals instead of the standard TPU. Additionally, the barrel features sensor grooves on both sides for direct mounting of CMSE or DMSE switches, though a magnet (-S) must be specified for that functionality.
Airtac SAI32 Standard Cylinder SAI32X210 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X210 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X210
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X210 Is Used
Component Clamping
Ideal for securing light workpieces during machining or assembly, utilizing its 563N output at 0.7 MPa to hold components firmly in jigs.
Package Diverting
Provides reliable actuation for diverting small cartons or products on packaging lines, with the 210mm stroke offering adequate reach for sorting gates.
Shuttle Feeding
Drives small shuttle mechanisms in automated warehousing systems, moving goods between processing stations with consistent speed.
Is the Airtac SAI32 Standard Cylinder SAI32X210 the Right Cylinder?
This 32mm bore yields 402N of push force at 0.5 MPa; stepping up to a 40mm bore increases that to 628N if your payload demands more thrust. Conversely, dropping to a smaller bore sacrifices power. For this 210mm stroke, be mindful of rod-bearing bending under side loads and consider an external guide rail to prevent premature wear.
As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other standard 32mm bore, 210mm stroke units with a PT G1/8 port. Mounting accessories like LB foot brackets or FA flanges match the standard footprint. Note that this standard cylinder will drift if air pressure is lost; use the SAIL variant for pneumatic locking requirements.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X210 FAQ
The SAI32X210 cylinder generates a push force of 402N at 0.5 MPa and 563N at 0.7 MPa, with a pull force of 345N at 0.5 MPa.
Yes, the SAI32X210 is dimensionally interchangeable per ISO 15552 standards, meaning it matches the mounting interface, G1/8 port, and stroke dimensions of similar profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X210
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.