Airtac SAI32 Standard Cylinder SAI32X230
The AirTAC SAI32 Standard Cylinder SAI32X230 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X230
The AirTAC SAI32X230 is a double-acting ISO 15552 profile cylinder offering a 32mm bore and 230mm stroke. It generates 563N of push force at 0.7 MPa, making it well-suited for mid-distance positioning tasks. The extruded aluminum barrel omits tie rods, presenting a clean exterior that matches standardized ISO 15552 mounting dimensions.
This specific configuration features a standard carbon steel piston rod and PT tapered port threads. Because a magnet is not specified, it does not include the internal magnetic ring required for direct switch sensing. For operations needing end-position deceleration, the adjustable air cushions at both ends can be fine-tuned to absorb kinetic energy.
Airtac SAI32 Standard Cylinder SAI32X230 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X230 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X230
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X230 Is Used
Package Sorting
Ideal for pushing lightweight totes across conveyor belts in distribution centers over a 230mm extension distance.
Small Part Ejection
Provides reliable ejection force for small machined components from an enclosed fixture.
Gate Diverting
Actuates routing gates in material handling lines where a compact 32mm bore fits tight spaces.
Is the Airtac SAI32 Standard Cylinder SAI32X230 the Right Cylinder?
If an application requires less reach, stepping down to a 32mm bore with a 200mm stroke reduces overall cylinder length while maintaining the same 402N push force at 0.5 MPa. Conversely, moving up to a 40mm bore increases thrust to 879N at 0.7 MPa if the 32mm capacity is insufficient. Because this 230mm stroke exceeds 300mm, side-load management is less critical here, but always ensure rigid mounting to prevent rod bearing wear.
This model serves as a dimensionally interchangeable direct replacement for any ISO 15552 cylinder matching its 32mm bore, 230mm stroke, G1/8 port, and mounting footprint. Note that a standard double-acting cylinder will not hold a load if air pressure is lost; if pneumatic locking is required for safety, consider the SAIL variant. To add proximity sensing later, an -S magnet version is necessary.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X230 FAQ
The SAI32X230 generates 563N of push force and 345N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 563N.
No, because this specific configuration does not include an internal magnet. To use CMSE or DMSE series sensors, you must select the -S magnet option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X230
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.