Airtac SAI32 Standard Cylinder SAI32X30S
The AirTAC SAI32 Standard Cylinder SAI32X30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X30S
The AirTAC SAI32X30-S is a double-acting ISO 15552 profile cylinder engineered for compact, high-cycle automation. Delivering a push force of 402 N at 0.5 MPa, this 32 mm bore unit is tailored for short 30 mm strokes where rapid positioning is critical. The extruded aluminum barrel design omits tie-rods, providing a clean exterior that drops directly into standard ISO 15552 mounting interfaces.
Configured with a standard carbon steel piston rod and a built-in magnet (-S), this model is immediately compatible with CMSE and DMSE sensor switches. The dual sensor grooves machined into both sides of the barrel allow for flexible switch placement in tight machinery. Fluid ports feature PT tapered threads, ensuring robust pneumatic sealing right out of the box.
Airtac SAI32 Standard Cylinder SAI32X30S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X30S Is Used
Component Sorting
Drives small diverter gates in high-speed sorting lines, using the 30 mm stroke to rapidly flick parts into correct bins.
Product Stopping
Acts as a compact pop-up stopper on a packaging conveyor, holding lightweight cartons momentarily for scanning.
Clamp Actuation
Provides 402 N of push force at 0.5 MPa to secure small electronic housings during ultrasonic welding.
Is the Airtac SAI32 Standard Cylinder SAI32X30S the Right Cylinder?
Select this 32 mm bore when an application demands precise point-to-point movement within a tight 30 mm envelope. If a project requires slightly less thrust, stepping down is an option, but this bore provides an optimal balance of speed and force for light assembly. The integrated magnet makes it ideal for operations needing exact end-of-stroke confirmation.
For installations where air pressure might be inadvertently exhausted, remember that a standard double-acting cylinder will drift and cannot hold a load in place. If static holding is mandatory without live air pressure, consider deploying the SAIL variant with an air-released lock. To guarantee a seamless ISO 15552 replacement, verify the 32 mm bore, 30 mm stroke, PT G1/8 port, and select appropriate mounting accessories like an LB foot or FA flange.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X30S FAQ
At a standard operating pressure of 0.5 MPa, this 32 mm bore cylinder generates a push force of 402 N and a pull force of 345 N. If pressure is increased to 0.7 MPa, the push force rises to 563 N.
Yes, the SAI32X30-S is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 profile cylinders, provided the 32 mm bore, 30 mm stroke, and PT G1/8 port match your existing manifold setup.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.