Airtac SAI32 Standard Cylinder SAI32X360
The AirTAC SAI32 Standard Cylinder SAI32X360 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 360mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke360 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X360
The AirTAC SAI32X360 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and a 360mm stroke. It delivers 402N of push force at 0.5 MPa and 563N at 0.7 MPa, making it well-suited for light-duty positioning tasks over extended distances. The extruded aluminum barrel omits tie-rods, providing a clean exterior that resists contamination.
This configuration uses a standard carbon steel piston rod and PT tapered port threads. Because it lacks a magnet, it cannot host internal reed sensors like the CMSE or DMSE series. For environments requiring higher heat resistance, users can specify Viton (H) seals instead of the standard TPU material.
Airtac SAI32 Standard Cylinder SAI32X360 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X360 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X360
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X360 Is Used
Package Sorting Diverter
Provides the extended reach needed to push light cardboard cartons from a main sorting belt into secondary packaging chutes.
Small Component Ejection
Uses its 402N push force at 0.5 MPa to reliably eject lightweight molded plastic parts from machining centers into collection bins.
Pallet Tagging Station
Actuates a labeling applicator head over a long stroke to reach pallets of varying widths passing on a conveyor.
Is the Airtac SAI32 Standard Cylinder SAI32X360 the Right Cylinder?
With a 360mm stroke on a 32mm bore, this cylinder operates well within its 1000mm maximum standard stroke limit. However, long unsupported rods are susceptible to bending under side loads. To protect the rod bearing and ensure smooth operation, implement an external guide rail or select a guided cylinder variant for your linear motion setup.
If your application requires higher force, stepping up to the 40mm bore yields 879N of push force at 0.7 MPa. Note that the adjustable air cushions at both ends only decelerate the piston near stroke limits; they do not lock the load. If you need to hold a vertical load without live air pressure, specify the SAIL (air-released lock) variant or utilize an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X360 FAQ
At an operating pressure of 0.5 MPa, this 32mm bore cylinder provides 402N of push force and 345N of pull force. At 0.7 MPa, the push force increases to 563N.
Yes, the SAI32X360 is dimensionally interchangeable per ISO 15552. You can drop it into existing ISO 15552 mounting interfaces using the same bore, stroke, and PT port dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X360
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.