Airtac SAI32 Standard Cylinder SAI32X5
The AirTAC SAI32 Standard Cylinder SAI32X5 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 5mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke5 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X5
The AirTAC SAI32X5 is a double-acting ISO 15552 profile cylinder engineered for ultra-short stroke applications. Delivering a push force of 402 N at 0.5 MPa, this compact actuator is perfect for tight spaces requiring rapid, precise clamping or ejection. Its extruded aluminum barrel design eliminates traditional tie rods, providing a smooth exterior that integrates seamlessly into modern machinery.
For environments requiring specific media compatibility, this model features a standard carbon steel piston rod and can be configured with NBR seals instead of the standard TPU. Additionally, while this specific unit lacks a magnet, the barrel includes dual-sided sensor grooves ready for CMSE or DMSE switches if position feedback is later required.
Airtac SAI32 Standard Cylinder SAI32X5 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X5 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X5
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X5 Is Used
Micro-Clamping
Ideal for securing small electronic components or thin workpieces during machining, providing 402 N of holding force in a minimal footprint.
Part Ejection
Delivers rapid 5 mm strokes to eject small parts from conveyor lines without extending into adjacent work zones.
Valve Actuation
Suitable for toggling small mechanical valves or gates where a full 25 mm stroke would cause mechanical interference.
Is the Airtac SAI32 Standard Cylinder SAI32X5 the Right Cylinder?
Choose the SAI32X5 when you need absolute minimal stroke length in a standardized ISO 15552 mounting footprint. If your application requires slightly more travel, stepping up to the SAI32X25 provides the same 402 N force class but with 20 mm of additional extension. Because the 5 mm stroke is so short, side-load bending is negligible, but always ensure axial alignment to prevent premature rod seal wear.
This cylinder uses a PT tapered G1/8 port. Being a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. If your machine must hold a load vertically without air pressure, note that the standard SAI cannot hold position; consider the SAIL (with air-released lock) variant or an external rod lock for those safety-critical setups.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X5 FAQ
At a standard operating pressure of 0.5 MPa, the SAI32X5 generates a push force of 402 N and a pull force of 345 N. It can reach up to 724 N push force at 0.9 MPa.
Yes, the SAI32X5 is a genuine ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders. It uses a G1/8 port and standard ISO mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.