Airtac SAI32 Standard Cylinder SAI32X700S
The AirTAC SAI32 Standard Cylinder SAI32X700S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X700S
The AirTAC SAI32X700-S is a double-acting ISO 15552 profile cylinder with a 32mm bore and 700mm stroke. It delivers a push force of 563N at 0.7 MPa. The extruded aluminum barrel design eliminates tie-rods, providing a clean exterior that drops directly into standard ISO 15552 mounting footprints.
Equipped with a magnetic piston (-S), this unit supports CMSE and DMSE reed switches via sensor grooves on both sides of the barrel. The standard carbon steel piston rod handles industrial wear, while the adjustable air cushions at both ends absorb impact at stroke extremes.
Airtac SAI32 Standard Cylinder SAI32X700S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X700S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X700S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X700S Is Used
Package Diverting
Extends 700mm to push cartons between parallel conveyor lines without requiring excessive pneumatic force.
Light Assembly Press
Provides 563N of push force at 0.7 MPa to seat lightweight plastic or aluminum components into housings.
Long-Reach Ejection
Cycles slowly to eject finished parts from deep machinery beds, using adjustable cushions to stop smoothly.
Is the Airtac SAI32 Standard Cylinder SAI32X700S the Right Cylinder?
Choose this 32mm bore when an application requires moderate force over a long 700mm distance. If you need less extension, stepping down to a shorter stroke reduces rod bearing wear. For higher force requirements at 0.5 MPa, consider the 40mm bore which outputs 628N.
At 700mm of extension, the unsupported rod is highly susceptible to bending under side loads. Use an external guide rail or a guided cylinder to prevent premature seal failure. Remember that standard double-acting cylinders drift when air pressure is removed; use an external rod lock or the SAIL variant if the load must be held vertically.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X700S FAQ
At 0.7 MPa operating pressure, this 32mm bore cylinder generates a push force of 563N and a pull force of 345N.
Yes, the SAI32X700-S is dimensionally interchangeable per ISO 15552. You can swap it into existing ISO 15552 mounting accessories using its PT G1/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.