Airtac SAI32 Standard Cylinder SAI32X750
The AirTAC SAI32 Standard Cylinder SAI32X750 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X750
The AirTAC SAI32X750 is a double-acting ISO 15552 profile cylinder engineered for long-stroke automation. Delivering a push force of 402N at 0.5 MPa and 563N at 0.7 MPa, it suits compact positioning tasks requiring extended travel. The extruded aluminum barrel omits tie-rods, presenting a clean exterior that simplifies machine integration.
This unit features a standard carbon steel piston rod and PT tapered port threads. Because no magnet is specified, it lacks the internal magnetic ring; position sensing requires external limit switches rather than CMSE or DMSE sensors.
Airtac SAI32 Standard Cylinder SAI32X750 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X750 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X750
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X750 Is Used
Extended Reach Pick-and-Place
Ideal for transferring small components across wide machine beds using the full 750 mm travel distance.
Sorting Diverter
Provides the 402N push force needed to route lightweight packages on a high-speed packaging line.
Vertical Lifting Gate
Drives compact access panels or machine safety gates over extended vertical distances.
Is the Airtac SAI32 Standard Cylinder SAI32X750 the Right Cylinder?
At a 750 mm stroke, this 32 mm bore cylinder operates near its maximum standard stroke limit of 1000 mm. For applications needing less reach, stepping down to a SAI32X500 saves space while retaining the 402N output at 0.5 MPa. If higher thrust is required, a SAI40X750 increases force to 628N.
Long unsupported strokes inherently invite rod-bearing bending under side loads. To protect the piston seal and bearing, guide the load externally or utilize a guided cylinder carriage. Remember that a standard SAI does not hold loads safely upon air loss; integrate a SAIL variant or external rod lock for fail-safe holding. As a true ISO 15552 profile cylinder, it offers direct dimensional interchangeability with other ISO 15552 standard cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X750 FAQ
The SAI32X750 generates a push force of 402N at 0.5 MPa and 563N at 0.7 MPa, with a pull force of 345N at 0.5 MPa.
Yes, the SAI32X750 is dimensionally interchangeable per ISO 15552, allowing it to serve as a direct replacement for other standard profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X750
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.