Airtac SAI32 Standard Cylinder SAI32X75S
The AirTAC SAI32 Standard Cylinder SAI32X75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X75S
The AirTAC SAI32X75-S is a double-acting ISO 15552 profile cylinder offering a 402N push force at 0.5 MPa. Its 75mm stroke is ideal for short-travel clamping and ejection tasks. The extruded aluminum barrel design omits traditional tie rods, providing a clean exterior.
Equipped with a magnetic piston (-S), this unit supports CMSE and DMSE sensor switches via the integrated dual-side grooves. It features a standard carbon steel piston rod and utilizes a PT tapered G1/8 port thread for secure pneumatic connections.
Airtac SAI32 Standard Cylinder SAI32X75S Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X75S Is Used
Small Part Ejection
Provides reliable 402N push force to eject small molded or machined components from fixtures.
Material Diverting
The 75mm stroke actuates diverter arms on packaging lines to route products into sorting lanes.
Clamp Grippers
Secures lightweight workpieces during secondary machining operations using dual-side sensor detection.
Is the Airtac SAI32 Standard Cylinder SAI32X75S the Right Cylinder?
Select the 32mm bore when 402N of push force at 0.5 MPa is sufficient for your cycle. If your application requires greater thrust, stepping up to the 40mm bore yields 628N. For operations demanding load holding without continuous air pressure, consider the SAIL locking variant or an external rod lock.
This model ensures a direct replacement for any ISO 15552 mounting interface. It pairs with standard 32mm mounting accessories like LB foot brackets or FA flanges, and the included magnet allows for precise end-of-stroke detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X75S FAQ
At 0.5 MPa operating pressure, this double-acting cylinder provides a 402N push force and a 345N pull force.
Yes, it is dimensionally interchangeable per the ISO 15552 standard, serving as a direct replacement for other ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.