Airtac SAID32 Double Rod Cylinder SAID32AX100S
The AirTAC SAID32 Double Rod Cylinder SAID32AX100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX100S
The AirTAC SAID32X100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 100mm stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 483N of force in both extend and retract directions at 0.7 MPa. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for position detection.
This model uses a corrosion-resistant SUS420J2 stainless steel rod and PT tapered port threads. The twin-rod architecture is ideal for applications requiring dual-side guidance, anti-rotation control, or mounting a rear cam and sensor flag. It shares the standard SAI barrel and mounting interface but omits the FB, CA, CB, and CR mounts, utilizing only Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories.
Airtac SAID32 Double Rod Cylinder SAID32AX100S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX100S Is Used
Symmetric Force Transfer
Ideal for mechanisms requiring identical 483N push and pull forces at 0.7 MPa, ensuring perfectly balanced symmetric motion without pressure compensation valves.
Anti-Rotation Slides
The twin-rod design prevents piston rotation, providing precise linear guidance for sliding components where a single rod would twist or bind under offset loads.
Rear-Side Sensing
Mount a cam or target flag on the rear rod extension to trigger external proximity sensors, keeping the primary work area clear of obstructions.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX100S the Right Cylinder?
Choose this 32mm bore double-rod cylinder when an application demands equal push and pull forces—345N at 0.5 MPa—along with superior anti-rotation guidance compared to a single-rod SAI. If your mechanism requires less force, step down is not an option below 32mm in this series, but stepping up to a 40mm bore provides 528N both ways. The integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors for precise end-of-stroke detection.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders, serving as a direct replacement. Remember that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If your system loses air pressure, the cylinder will drift, requiring an external rod lock or a SAIL/BSAID variant for secure position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX100S FAQ
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It delivers 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
No, the adjustable air cushions only decelerate the piston near the end of the stroke and do not act as a lock. If live air pressure is lost or the valve is centered, the cylinder will drift. For load-holding without pressure, consider an AirTAC SAIL or BSAID cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.