
The AirTAC SAID32 Double Rod Cylinder SAID32AX130 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X130 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 130mm stroke. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding an equal 345 N of force in each direction at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This variant is equipped with a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. It uses PT tapered port threads and lacks a piston magnet, meaning position sensing requires external physical stops or limit flags rather than internal reed or electronic switches.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX130 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a lightweight transfer carriage where equal 345 N push and pull forces ensure consistent momentum shifts without requiring pressure adjustments between directions.
Guides a precision marking head on the front rod while using the rear rod to mount an external physical stop flag, preventing workpiece deflection.
Actuates a dual-sided clamping fixture where the through-rod simultaneously engages a secondary mechanism at the rear of the machine envelope.
Select the 32mm bore when your application requires compact, symmetric force, but step up to the 40mm bore if you need roughly 528 N both ways at 0.5 MPa. The twin-rod design is chosen over a single-rod SAI when the mechanism demands dual-side guidance, anti-rotation stability, or a rear rod extension to mount a secondary cam. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod cylinders.
Note that this model lacks a piston magnet, so it cannot host internal CMSE or DMSE sensors. Furthermore, the adjustable air cushions at both ends only decelerate the piston near stroke limits; they do not hold a load. If pressure drops, the piston drifts, requiring an external guide or a SAIL lock cylinder for position holding. For this 130mm stroke, side-load is minimal, but always ensure the load is guided to prevent rod-bearing bending.
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the effective force is identical in both directions. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extension and retraction.
Yes, the SAID32X130 is dimensionally interchangeable per ISO 15552 and can serve as a direct replacement for other standard profile double-rod cylinders. It uses the standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and PT port threads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.