
The AirTAC SAID32 Double Rod Cylinder SAID32AX140S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X140-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 140mm stroke. Because a piston rod exits both end covers, the annulus area is identical on both sides, yielding 483 N of force in both extend and retract directions at 0.7 MPa. The -S suffix indicates an integrated magnet for position sensing.
This through-rod design allows mounting a primary workpiece on one end and a cam, position flag, or secondary mechanism on the rear rod, providing superior anti-rotation guidance. It features a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, fully compatible with AirTAC CMSE reed and DMSE electronic solid-state switches.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX140S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for shuttle systems requiring identical 483 N push and pull forces to move payloads consistently without recalibrating pressure regulators between strokes.
Drive a primary tool on the front rod while simultaneously operating a secondary mechanism or ejector on the rear rod, saving space and reducing cycle time.
The -S magnet works with CMSE and DMSE switches mounted in the dual barrel grooves, allowing precise end-of-stroke detection for complex sequencing.
Choose this 32mm bore double-rod cylinder when your application requires equal push and pull forces, symmetric speeds, or twin-side actuation. Stepping down is not an option as 32mm is the smallest ISO 15552 size, but stepping up to a 40mm bore provides 528 N at 0.5 MPa if your 345 N (at 0.5 MPa) requirement grows. The double-rod architecture inherently resists torsion better than a single-rod SAI cylinder.
For direct replacements, verify the ISO 15552 mounting interface dimensions, the PT G1/8 port, and your chosen mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2; FB/CA/CB/CR are excluded). Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If position holding without live air pressure is required, use an external rod lock or consider the SAIL or BSAID series. Since the stroke is 140mm, side-load is minimal, but ensure you have adequate rear-rod clearance for the protruding shaft.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both the extend and retract directions.
Yes, the SAID32X140-S is dimensionally interchangeable per ISO 15552. You can drop it in for other ISO 15552 double-rod cylinders, but ensure you have rear-rod clearance and use the correct PT G1/8 port and compatible mounting brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.