
The AirTAC SAID32 Double Rod Cylinder SAID32AX15 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 15mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X15 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 15mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding exactly 345 N of force in both directions at 0.5 MPa. This symmetric output is essential for mechanisms requiring consistent push and pull dynamics.
Equipped with SUS420J2 stainless steel rods and PT tapered port threads, this compact unit provides dual-side guidance to resist torsion. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount position switches independently on either end. Note that this standard variant does not include a magnet for internal switching.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX15 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece forward and retracts it with identical 345 N thrust, ensuring perfectly balanced timing for automated transfer lines.
The twin-rod architecture prevents piston rotation during short 15mm movements, maintaining precise vertical alignment for clamping jaws.
Mounts a primary tool on the front rod and a secondary mechanical flag on the rear protrusion to trigger external limit valves.
Select the SAID32X15 when an application demands equal force and speed in both travel directions, or requires a rear rod end to drive a secondary cam and flag. If your mechanism needs less force, stepping down is not an option within the SAID range as 32mm is the smallest bore. Conversely, if you require higher symmetric thrust, the 40mm bore provides 528 N each way at 0.5 MPa.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles found on single-rod variants. Remember that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If air pressure is lost, the cylinder will drift, requiring an external pilot-operated check valve for position holding.
Quick checklist
Because it is a double-rod cylinder, the rod area is subtracted from both sides of the piston. This results in equal extend and retract forces of 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
No, the SAID uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. However, its body dimensions are fully interchangeable per ISO 15552 standards.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.