Airtac SAID32 Double Rod Cylinder SAID32AX150
The AirTAC SAID32 Double Rod Cylinder SAID32AX150 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX150
The AirTAC SAID32X150 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 150mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on both sides. This provides equal force and speed in both directions, delivering 483N at 0.7 MPa for push and pull alike.
This configuration uses SUS420J2 stainless steel rods for enhanced durability against moisture and minor corrosion. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting. Fluid ports are PT tapered thread type (G1/8), and the adjustable air cushions at both ends ensure smooth deceleration of the 150mm travel.
Airtac SAID32 Double Rod Cylinder SAID32AX150 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX150 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX150
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX150 Is Used
Symmetric Force Transfer
Drives a transfer mechanism where the 483N push and pull forces must be perfectly matched to avoid jerky movements during directional changes.
Anti-Rotation Slides
Utilizes the twin-rod structure to guide a vertical slide, preventing torsional twist without requiring external linear bearings.
Rear-Rod Position Sensing
Mounts the primary tool on the front rod while using the rear rod extension to trigger a limit flag for precise end-of-stroke confirmation.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX150 the Right Cylinder?
Select this 32mm bore when an application requires symmetric force (483N each way at 0.7 MPa) and superior anti-rotation guidance compared to a single-rod SAI. If you need less force, a smaller option is unavailable in standard double-rod formats, but stepping up to a 40mm bore yields 739N. The twin-rod design is ideal for mounting a workpiece on the front rod and a position flag or cam on the rear rod. Note that a plain SAID cylinder will drift and cannot hold a load if air pressure is lost; for locking requirements, consider the SAIL or BSAID series. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX150 FAQ
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, it shares the ISO 15552 footprint. The compatible SAID mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits FB, CA, CB, and CR which are for single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.