
The AirTAC SAID32 Double Rod Cylinder SAID32AX155 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X155 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 155mm non-standard stroke. Because a piston rod exits both end covers, the effective annulus area is identical on extend and retract. This means the cylinder delivers an equal push and pull force of 345N at 0.5 MPa, ensuring perfectly symmetric speed and thrust for demanding transfer applications.
This specific configuration is built with SUS420J2 stainless steel rods (material code A) for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of position switches. Note that the through-rod design requires additional rear clearance compared to a single-rod SAI, and the 155mm stroke is a non-standard made-to-order length.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX155 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for parts transfer systems requiring identical push and pull dynamics, utilizing the equal 345N thrust in both directions to smoothly shuttle components without speed variations.
The twin-rod architecture prevents piston rotation, providing precise linear guidance for lifting or pressing tasks where workpiece orientation must be strictly maintained.
The protruding rear rod can drive a secondary mechanism or cam, allowing one cylinder to simultaneously perform a primary press operation and a secondary sequencing action.
Choose this 32mm bore double-rod cylinder when your mechanism requires equal force both ways (345N at 0.5 MPa) and enhanced anti-rotation guidance that a single-rod SAI cannot provide. If your application needs less thrust, stepping down is not an option within this series as 32mm is the smallest bore. To step up, the 40mm bore yields 528N at 0.5 MPa. Because the stroke is 155mm (below the 300mm side-load threshold), standard internal rod bearing support is sufficient without needing an external guide.
This model uses PT ports and lacks a magnet (-S not specified), meaning it cannot use AirTAC CMSE reed or DMSE electronic sensors without modification. It supports a reduced ISO 15552 mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift and cannot hold a load if air pressure is lost. For positive holding, consider an external rod lock or the SAIL series.
Quick checklist
Because it is a double-rod cylinder, the rod area is subtracted from both sides of the piston. This results in equal extend and retract forces: 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa.
Yes, as a true ISO 15552 profile cylinder, its mounting interface and envelope dimensions are interchangeable with other ISO 15552 double-rod cylinders, allowing for a direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.