
The AirTAC SAID32 Double Rod Cylinder SAID32AX160 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X160 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 160mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on extend and retract, yielding exactly 345N of force each way at 0.5MPa. This symmetric output is perfect for mechanisms requiring balanced push and pull dynamics.
This configuration uses a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and features PT tapered port threads (G1/8). The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this specific unit lacks the internal magnet required for them. You can mount a workpiece on the front rod and a cam or position flag on the rear.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX160 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage with identical push and pull thrust, ensuring consistent cycle times without needing to adjust pressure for directional changes.
Uses the twin-rod geometry to guide a vertical slide, preventing piston rotation and maintaining precise tool alignment without external linear bearings.
Mounts the primary workpiece on the front rod while utilizing the rear rod protrusion to physically trip a mechanical limit switch or secondary mechanism.
Select this 32mm bore when an application demands equal force and speed in both directions, which a single-rod SAI cannot provide. If your mechanism requires less force, stepping down is not an option in this size range, but if you need more thrust, the 40mm bore offers 528N each way at 0.5MPa. The SAID32X160 uses a 12mm rod with an M10x1.25 thread, providing decent side-load capacity, but at 160mm of stroke, external guidance is still recommended for rigid loads.
Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles found on single-rod variants. This cylinder is dimensionally interchangeable per ISO 15552 standards. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold the load if air pressure is lost. For position holding, consider a SAIL or BSAID variant, or use an external pilot-operated check valve.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa in both directions.
Yes, the SAID32X160 is dimensionally interchangeable with other ISO 15552 double-rod profile cylinders. It shares the same mounting footprint and port sizes, allowing for a direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.