Airtac SAID32 Double Rod Cylinder SAID32AX180
The AirTAC SAID32 Double Rod Cylinder SAID32AX180 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke180 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX180
The AirTAC SAID32X180 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32 mm bore and 180 mm stroke. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding exactly 483 N of force each way at 0.7 MPa. The piston travels at 30-800 mm/s on G1/8 PT tapered ports.
This specific variant uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount position flags or CMSE reed and DMSE electronic switches along either rod extension. Adjustable air cushions at both ends absorb end-of-stroke impact.
Airtac SAID32 Double Rod Cylinder SAID32AX180 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX180 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX180
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX180 Is Used
Symmetric Force Transfer
Drives a transfer arm with exactly 483 N of force in both directions at 0.7 MPa, ensuring consistent timing on push and pull strokes without requiring pressure compensation.
Dual-Side Actuation
Mounts the primary workpiece on the front rod and a secondary cam or limit flag on the rear rod to trigger downstream sequencing in tight assembly cells.
Anti-Rotation Slides
Utilizes the twin-rod geometry to guide loads against rotation, preventing jaw twist during vertical lifting or pressing operations without external guides.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX180 the Right Cylinder?
Select this 32 mm bore when an application requires equal push and pull forces—345 N at 0.5 MPa—along with dual-side guidance to prevent rotation. If your mechanism needs less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore provides 528 N each way at 0.5 MPa. Choose the SAID twin-rod design over a single-rod SAI when you need to drive a secondary mechanism or mount a limit flag from the rear rod. Standard mounting accessories include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
This cylinder is dimensionally interchangeable per ISO 15552, acting as a direct replacement for other ISO 15552 double-rod cylinders. Note that a plain SAID does not hold its position or load when air is lost or the valve is centered; the piston will drift. If your application requires dead-stop holding without live pressure, consider the SAIL lock or BSAID clamp-lock variants. Since the stroke is 180 mm, side-load and rod-bearing bending are minimal, but always verify load alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX180 FAQ
The SAID32X180 provides equal force in both extend and retract directions due to its double-rod design. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, the SAID32X180 is dimensionally interchangeable per ISO 15552. It serves as a direct replacement for other ISO 15552 double-rod profile cylinders, utilizing a standard mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX180
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.