Airtac SAID32 Double Rod Cylinder SAID32AX190
The AirTAC SAID32 Double Rod Cylinder SAID32AX190 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke190 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX190
The AirTAC SAID32X190 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32 mm bore and 190 mm stroke. Because a piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 483 N of thrust in both extend and retract directions at 0.7 MPa. The SUS420J2 stainless steel rods provide robust corrosion resistance and high surface hardness for demanding industrial environments.
This through-rod design allows you to mount the primary workpiece on one end while attaching a position flag, cam, or secondary mechanism to the rear rod. The extruded aluminum barrel includes sensor grooves on both sides, and the adjustable air cushions at both ends absorb impact at stroke limits. Note that the overall length is greater than a single-rod SAI, requiring extra rear clearance.
Airtac SAID32 Double Rod Cylinder SAID32AX190 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX190 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX190
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX190 Is Used
Symmetric Force Transfer
Delivers identical 483 N thrust in both directions, making it perfect for shuttle mechanisms and indexing units that require balanced momentum and equal cycle times.
Anti-Rotation Slides
The twin-rod architecture prevents the piston from twisting under offset loads, providing stable linear guidance for precision sliding fixtures without external guide rails.
Through-Rod Sensing
The protruding rear rod offers a convenient mounting point for a physical limit flag or cam, allowing rear-side position sensing without interfering with the primary work area.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX190 the Right Cylinder?
Choose this 32 mm bore double-rod cylinder when your mechanism requires equal push and pull forces (483 N at 0.7 MPa) and superior anti-rotation guidance. If your application needs less force, stepping down is not an option within the SAID range, but stepping up to a 40 mm bore provides 739 N at 0.7 MPa for heavier loads. Unlike a single-rod SAI, this twin-rod configuration prevents torsional twist on the payload.
This model uses a PT tapered G1/8 port and accepts mounting accessories from the SAID set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552. A plain SAID does not hold its position when air pressure is lost; for fail-safe load holding, consider an AirTAC SAIL or BSAID. For this 190 mm stroke, standard speeds of 30-800 mm/s are supported.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX190 FAQ
Because the double-rod design occupies area on both sides of the piston, the effective area is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extension and retraction.
Yes, the SAID32X190 is a true ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a PT G1/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX190
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.