
The AirTAC SAID32 Double Rod Cylinder SAID32AX190S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X190-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 190mm stroke. Because a piston rod exits both end covers, the annulus area is identical on the extend and retract sides. This yields perfectly symmetrical dynamics, generating 483N of force in both directions at 0.7 MPa. The integrated -S magnet pairs directly with CMSE reed and DMSE electronic sensors mounted along the dual side grooves.
This specific configuration features a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance and PT tapered port threads (G1/8). The through-rod design allows engineers to mount the primary workpiece on one end while attaching a position flag, cam, or secondary mechanism to the rear rod end. This dual-sided guidance provides exceptional anti-rotation stability compared to standard single-rod SAI cylinders.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX190S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer shuttle where the extend and retract cycles must move identical masses at the exact same speed, leveraging the equal annulus area for perfectly balanced kinetic energy.
Guides a heavy vertical lifting slide using twin rods exiting both covers to resist torsional twist and prevent binding during high-speed reciprocating motion.
Actuates a clamping jaw on the front rod end while using the rear rod protrusion to drive a physical limit flag past a DMSE solid-state sensor for redundant position confirmation.
Choose this 32mm bore double-rod cylinder when an application strictly requires equal push and pull forces (483N at 0.7 MPa) and anti-rotation guidance. If your mechanism needs less force, stepping down is not an option as 32mm is the smallest standard SAID size; however, if you need significantly more thrust, the 40mm bore provides 739N both ways at 0.7 MPa. The SAID series uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets entirely.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. Note that the overall length is longer than a single-rod unit because the rear rod protrudes from the back cover, requiring extra clearance. Remember that a plain SAID does not hold its load when air pressure is lost or exhausted; for position holding without live pressure, consider an AirTAC SAIL or BSAID model. At a 190mm stroke, side-load risks are minimal, but long unsupported strokes still require an external guide.
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is identical in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders, but it only accepts the SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). The included -S magnet works with AirTAC CMSE reed and DMSE electronic sensors in the dual side grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.