Airtac SAID32 Double Rod Cylinder SAID32AX210
The AirTAC SAID32 Double Rod Cylinder SAID32AX210 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX210
The AirTAC SAID32X210 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32 mm bore and 210 mm stroke. Because the twin rods occupy both sides of the piston, the annulus area is identical in both directions, yielding an equal push and pull force of 483 N at 0.7 MPa. It uses a PT tapered port thread and a 12 mm SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance.
This through-rod design allows you to mount the primary workpiece on one end while utilizing the rear rod end for a position flag, cam, or secondary mechanism. The extruded aluminum barrel includes sensor grooves on both sides, and the cylinder relies on adjustable air cushions at both ends (27 mm cushion length) to decelerate the piston smoothly.
When choosing this cylinder, note that a plain double-rod actuator does not hold its load if air pressure is lost; for locking requirements, consider the SAIL or BSAID series. The SAID32X210 is dimensionally interchangeable per ISO 15552 and supports a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR. Operating speed ranges from 30-800 mm/s. Since the stroke is 210 mm, side-load and rod-bearing bending are minimal, but external guides are recommended for high radial loads.
Airtac SAID32 Double Rod Cylinder SAID32AX210 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX210 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX210
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX210 Is Used
Symmetric Force Transfer
Ideal for mechanisms requiring identical push and pull forces, such as alternating pick-and-place arms where the 483 N output remains constant in both directions.
Anti-Rotation Slides
The twin 12 mm rods provide superior guidance and prevent piston rotation, making it perfect for lifting heavy vertical slides without binding.
Rear-Side Actuation
Mount the main tool on the front rod and use the rear rod end to trigger a mechanical limit switch or drive a secondary auxiliary mechanism.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX210 the Right Cylinder?
Select the SAID32X210 when your mechanism requires equal force both ways (483 N at 0.7 MPa) and anti-rotation guidance that a single-rod SAI cannot provide. If your application needs less force, stepping down is not an option in the 32 mm bore class, but stepping up to a 40 mm bore yields 739 N at 0.7 MPa. The 12 mm rod thread (M10x1.25) handles moderate side loads, but always use an external guide for unsupported loads. This model uses PT ports and lacks a magnet; add the -S suffix if you need CMSE reed or DMSE electronic sensors. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders without tie-rod interference.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX210 FAQ
The SAID32X21X210 provides an equal force of 483 N in both the extend and retract directions at 0.7 MPa (621 N at 0.9 MPa), because the double-rod design balances the effective piston area.
Yes, the SAID32X210 is dimensionally interchangeable per ISO 15552 and uses a standard mounting interface (Basic, FA, LB, TC, FTC, TCM1, TCM2), allowing it to serve as a direct replacement for other profile double-rod cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX210
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.