Airtac SAID32 Double Rod Cylinder SAID32AX230S
The AirTAC SAID32 Double Rod Cylinder SAID32AX230S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX230S
The AirTAC SAID32X230-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 230mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding an equal 483 N of force in both directions at 0.7 MPa. The integrated magnet (-S) enables precise position detection using AirTAC CMSE reed or DMSE electronic solid-state switches housed in the dual-side sensor grooves.
This variant is equipped with a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and PT tapered port threads. The twin-rod architecture is purpose-built for applications requiring rear-rod cam actuation, secondary tool mounting, or superior anti-rotation guidance compared to a standard single-rod SAI cylinder.
Airtac SAID32 Double Rod Cylinder SAID32AX230S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX230S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX230S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX230S Is Used
Symmetric Transfer
Drives a workpiece from one side while the opposing rear rod simultaneously operates a secondary mechanism, maintaining equal push and pull thrust throughout the 230mm travel.
Anti-Rotation Slides
The dual through-rods provide inherent torsional rigidity, preventing the load from twisting during vertical or horizontal sliding tasks without external guides.
Dual-Side Sensing
Utilizes the integrated -S magnet with DMSE electronic sensors on both ends to track precise extend and retract positions for automated confirmation.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX230S the Right Cylinder?
Selecting this 32mm bore makes sense when a symmetric 345 N force at 0.5 MPa is sufficient for both push and pull operations. If your mechanism demands higher thrust, stepping up to the 40mm bore provides 528 N both ways, whereas dropping below 32mm is not standard for this ISO 15552 series. The double-rod design is specifically chosen over single-rod actuators when the application requires twin-station actuation, external rear-rod sensing, or strict resistance to load rotation.
For a 230mm stroke, the extended rod length increases the leverage on the rod bearing, making external load guidance advisable to prevent premature side-load wear. Remember that the adjustable air cushions only decelerate the piston near stroke ends; they do not hold the load. If pressure is lost, the piston will drift, requiring an external pilot-operated check valve or a BSAID clamp-lock cylinder for true position holding. As a dimensionally interchangeable ISO 15552 unit, it drops in seamlessly with matching basic, FA, LB, or TC mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX230S FAQ
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
Yes, it shares standard ISO 15552 mounting dimensions and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, making it a direct replacement for other ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX230S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.