Airtac SAID32 Double Rod Cylinder SAID32AX30
The AirTAC SAID32 Double Rod Cylinder SAID32AX30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX30
The AirTAC SAID32X30 is a double-acting, double-rod ISO 15552 profile cylinder. A single piston drives a rod out of both end covers, yielding identical extend and retract forces. It provides 345N of thrust each way at 0.5MPa, matching the pull-side annulus area exactly.
This unit features a SUS420J2 stainless steel rod and PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting. Because the rear rod protrudes, ensure you leave adequate clearance for external cams or position flags.
Airtac SAID32 Double Rod Cylinder SAID32AX30 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX30 Is Used
Symmetric Force Transfer
Ideal for shuttle systems requiring identical 345N push and pull forces to maintain balanced motion control across a 30mm stroke.
Twin-Station Actuation
The through-rod design allows driving a primary workpiece on one end while simultaneously actuating a secondary valve or mechanism on the rear.
Anti-Rotation Slides
Dual rod guidance prevents piston rotation, making it perfect for precision sliding tasks where a single rod would allow twisting.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX30 the Right Cylinder?
Choose the SAID32X30 when an application demands equal push and pull forces, or requires rear-rod anti-rotation guidance that a single-rod SAI cannot provide. If your mechanism needs slightly less force, dropping to a smaller bore is not an option here as 32mm is the minimum size. To scale up, a bore 40 yields 528N each way at 0.5MPa.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR accessories. Note that air cushions only decelerate the piston near stroke end; this cylinder will not hold a load if air pressure is lost. For position holding, consider SAIL or BSAID variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX30 FAQ
Because the double-rod design subtracts the rod area from both sides, it delivers equal force in both directions: 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa.
Yes, the SAID32X30 is dimensionally interchangeable per ISO 15552. It shares the standard mounting interface and uses PT tapered ports, making it a direct replacement for equivalent ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.