Airtac SAID32 Double Rod Cylinder SAID32AX5
The AirTAC SAID32 Double Rod Cylinder SAID32AX5 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 5mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke5 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX5
The AirTAC SAID32X5 is a double-acting, double-rod ISO 15552 profile cylinder featuring a remarkably short 5mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding perfectly symmetrical force and speed. This compact actuator generates 345 N of thrust and pull at 0.5 MPa, ensuring consistent performance in both directions.
Equipped with a SUS420J2 stainless steel rod (option A) and PT tapered port threads, this variant is built for precision. The twin-rod architecture inherently resists rotation, allowing you to mount a primary workpiece on the front rod and a cam or position flag on the rear. An adjustable air cushion at both ends decelerates the piston smoothly, though it does not lock the load when air pressure is lost.
Airtac SAID32 Double Rod Cylinder SAID32AX5 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX5 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX5
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX5 Is Used
Micro-Clamping
Provides stable, non-rotating clamping force for delicate electronics assembly with its 5mm stroke and equal bidirectional thrust.
Symmetric Transfer
Drives a dual-station pick-and-place mechanism where the rear rod simultaneously actuates a secondary diverter or sensor flag.
Anti-Rotation Guide
Used in short-stroke gauging fixtures where the twin-rod design prevents piston twist, ensuring highly accurate linear measurement.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX5 the Right Cylinder?
Selecting the SAID32X5 is optimal when a compact, non-rotating drive is required for micro-displacement tasks. If your application demands higher force, stepping up to the 40mm bore provides 528 N both ways at 0.5 MPa, but the 32mm bore offers a tighter footprint. Unlike a single-rod SAI cylinder, this double-rod design provides dual-side guidance and equal push/pull dynamics.
When integrating this model, note that the rear rod requires additional clearance. For position feedback, you would need the -S magnet variant to utilize AirTAC CMSE (reed) or DMSE (electronic) sensors in the dual side grooves. It uses the standard ISO 15552 mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that standard air cushions only decelerate the piston; they will not hold a load vertically without live pressure.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX5 FAQ
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N in both directions at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, the SAID32X5 is dimensionally interchangeable per ISO 15552 standards. It serves as a direct replacement for other ISO 15552 double-rod profile cylinders, utilizing mounting accessories like FA, LB, and TC.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.