Airtac SAID32 Double Rod Cylinder SAID32AX60
The AirTAC SAID32 Double Rod Cylinder SAID32AX60 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX60
The AirTAC SAID32X60 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32 mm bore and 60 mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding equal force and speed in both directions. This compact unit delivers 483 N each way at 0.7 MPa.
The twin-rod architecture allows you to mount the primary workpiece on one end and a position flag or cam on the protruding rear rod. It features a SUS420J2 stainless steel rod for corrosion resistance and uses PT tapered port threads. Note that because the rear rod protrudes, you must allow extra clearance behind the rear cover during installation.
Airtac SAID32 Double Rod Cylinder SAID32AX60 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX60 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX60
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX60 Is Used
Symmetric Force Transfer
Push and pull identical payloads at 483 N without recalculating cylinder sizing, ensuring consistent cycle times in automated transfer lines.
Anti-Rotation Slides
Leverage the twin-rod geometry to guide vertical lifting slides, preventing piston rotation and binding without external linear bearings.
Rear-Rod Sensing
Mount a physical cam or limit flag on the rear protruding rod to trigger mechanical switches in environments where electronic sensors fail.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX60 the Right Cylinder?
Choose this 32 mm bore when an application requires 483 N of symmetric force both ways at 0.7 MPa. If your payload is lighter, stepping down is not an option in this series, but stepping up to the 40 mm bore (528 N at 0.5 MPa) provides a substantial margin for heavier transfer loads. The double rod is specifically selected over a single-rod SAI when dual-side guidance, anti-rotation stability, or rear-rod sensing is required.
As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod cylinders using the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting interfaces (omitting FB, CA, CB, and CR). It uses PT ports and lacks a standard magnet, so position sensing requires adding a magnet or external flags. Remember that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If pressure is lost, the piston drifts, so use a SAIL lock cylinder or external pilot-operated check valve for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX60 FAQ
Because it is a double-rod cylinder, the output force is identical in both extend and retract directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, it is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other standard ISO 15552 double-rod cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.