Airtac SAID32 Double Rod Cylinder SAID32AX60S
The AirTAC SAID32 Double Rod Cylinder SAID32AX60S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX60S
The AirTAC SAID32X60-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 60mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical in both directions, yielding perfectly symmetric thrust. It generates 483N of force each way at 0.7 MPa, ensuring balanced motion for transfer and lifting tasks.
Equipped with a magnet (-S), this variant supports AirTAC CMSE reed and DMSE electronic sensors housed within the dual-side barrel grooves. It features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and uses PT tapered port threads. The rear rod extension is ideal for mounting a cam or position flag to trigger external sensors.
Airtac SAID32 Double Rod Cylinder SAID32AX60S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX60S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX60S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX60S Is Used
Symmetric Force Transfer
Ideal for shuttle systems requiring identical push and pull kinetics, using the 483N both-way output to move payloads smoothly without speed shifts between strokes.
Anti-Rotation Guiding
The twin-rod architecture prevents mechanical twisting on vertical lifts, keeping the load perfectly aligned without needing external linear bearings.
Rear-Rod Cam Sensing
The protruding rear rod end drives an external cam or flag, allowing standalone DMSE electronic sensors to track stroke position independently of the front tooling.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX60S the Right Cylinder?
Select this 32mm bore when an application demands equal push and pull forces, specifically 345N at 0.5 MPa. If your mechanism requires less thrust, stepping down is not an option as 32mm is the minimum size, but stepping up to a 40mm bore increases the bidirectional force to 528N at 0.5 MPa. Choose the SAID double-rod configuration over a single-rod SAI when you need dual-side anti-rotation guidance or a rear-rod actuation point.
This model provides a direct replacement for other ISO 15552 double-rod cylinders, matching standard mounting dimensions. It uses the reduced SAID accessory set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold the load. If position holding without air pressure is required, use a SAIL lock cylinder, a BSAID clamp-lock, or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX60S FAQ
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable per ISO 15552. It supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not use the FB, CA, CB, or CR brackets found on single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.