Airtac SAID32 Double Rod Cylinder SAID32AX700
The AirTAC SAID32 Double Rod Cylinder SAID32AX700 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX700
The AirTAC SAID32X700 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 700mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding equal push and pull forces. This specific bore outputs 345 N each way at 0.5 MPa, ensuring perfectly symmetric motion control.
Equipped with a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance, this unit utilizes PT tapered port threading. The rear rod extension is perfect for mounting a position flag or driving a secondary mechanism, while the extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
Airtac SAID32 Double Rod Cylinder SAID32AX700 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX700 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX700
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX700 Is Used
Symmetric Force Transfer
Pushes and pulls a workpiece between two stations with identical 345 N force at 0.5 MPa, ensuring consistent travel speeds regardless of direction.
Anti-Rotation Slides
Twin rods exiting both ends provide superior torsional rigidity, preventing the load from twisting during the 700mm traverse.
Through-Rod Sensing
Uses the rear rod protrusion to mount a physical cam or limit flag, triggering external proximity sensors without interfering with the primary work area.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX700 the Right Cylinder?
Select this 32mm bore when an application demands equal 483 N force at 0.7 MPa in both directions, or step down if lower force is acceptable. A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation or require actuation at both ends. Note that a plain SAID does not hold position unpowered; use a SAIL or BSAID if locking is required.
With a 700mm stroke, the unsupported rod length increases susceptibility to side-load bending. Implementing an external guide is highly recommended. This model is dimensionally interchangeable per ISO 15552 and uses mounting accessories Basic, FA, LB, TC, FTC, TCM1, TCM2 (omitting FB/CA/CB/CR).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX700 FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, it is a profile cylinder dimensionally interchangeable per ISO 15552. It serves as a direct replacement for other ISO 15552 double-rod cylinders, matching the standard mounting footprint and PT port locations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.