Airtac SAID32 Double Rod Cylinder SAID32AX700S
The AirTAC SAID32 Double Rod Cylinder SAID32AX700S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke700 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX700S
The AirTAC SAID32X700-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 700mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, delivering an equal 345N of force in both directions at 0.5MPa. The -S suffix indicates an integrated magnet for position sensing.
This configuration uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and includes PT tapered port threads. The extruded aluminum barrel features sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches on either end to track the through-rod motion.
Airtac SAID32 Double Rod Cylinder SAID32AX700S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX700S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX700S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX700S Is Used
Symmetric Force Transfer
Drives a workpiece from one end while the opposing rear rod manages an equal counter-force, ensuring stable push and pull dynamics at 345N both ways.
Anti-Rotation Slides
The twin-rod architecture prevents piston rotation during the 700mm travel, making it ideal for guiding vertical slides or lifting stages without external linear bearings.
Through-Rod Sensing
Utilizes the rear protruding rod end to mount a physical limit flag, while the -S magnet triggers DMSE electronic sensors along the dual barrel grooves.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX700S the Right Cylinder?
Select this 32mm bore model when an application requires 345N of symmetric force both ways at 0.5MPa, or step up to the 40mm bore if you need 528N. A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation, or when a rear rod end is required to mount a cam, position flag, or secondary tool. For a direct replacement, match the 32mm bore, 700mm stroke, PT port thread, and choose from the SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
At 700mm of stroke, the 12mm rod is highly susceptible to side-load bending and rod-bearing wear. An external guide rail should be used to support the load. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold the load. If position holding without air pressure is required, use an external rod lock or a SAIL/BSAID variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX700S FAQ
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers an equal 345N of force in both extend and retract directions at 0.5MPa (483N at 0.7MPa).
Yes, the SAID32X700-S is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other standard ISO 15552 double-rod profile cylinders by matching the 32mm bore, 700mm stroke, and PT port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.