Airtac SAID32 Double Rod Cylinder SAID32AX750S
The AirTAC SAID32 Double Rod Cylinder SAID32AX750S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX750S
The AirTAC SAID32X750-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 750mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on both sides, yielding equal push and pull forces. This specific configuration outputs 345N each way at 0.5MPa, scaling to 621N at 0.9MPa.
This unit includes the -S magnet for use with AirTAC CMSE reed and DMSE electronic sensors, and uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. The extruded aluminum barrel integrates sensor grooves on both sides, while the PT tapered port threads match the standard G1/8 interface. The rear rod extension is ideal for mounting a secondary cam or position flag.
Airtac SAID32 Double Rod Cylinder SAID32AX750S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX750S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX750S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX750S Is Used
Symmetric Force Transfer
Drives a workpiece from one end while the rear rod simultaneously operates a secondary mechanism, maintaining equal 345N force and matching speeds in both directions.
Anti-Rotation Slides
The twin-rod architecture prevents the piston from twisting during the 750mm travel, providing stable linear guidance for precision sliding fixtures.
Through-Rod Sensing
Utilizes the -S magnet with DMSE electronic sensors to track position, while the protruding rear rod can physically trigger external limit flags.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX750S the Right Cylinder?
Select this 32mm bore when an application demands symmetric force and speed in both directions, offering 345N at 0.5MPa. If your mechanism requires less force, stepping down is not an option in the ISO 15552 range, but stepping up to a 40mm bore provides 528N both ways. The double-rod design is chosen over a single-rod SAI when the load needs dual-side guidance to prevent rotation, or when a rear rod is needed to drive a secondary mechanism. To detect position, use the built-in magnet with CMSE or DMSE switches.
At a 750mm stroke, the 12mm rod is highly susceptible to side-load bending and rod-bearing wear; an external linear guide is strongly recommended to support the load. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end and do not hold the load if air pressure is lost. For position holding without live pressure, consider a SAIL lock cylinder or an external pilot-operated check valve. This cylinder is dimensionally interchangeable per ISO 15552 and uses the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting set.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX750S FAQ
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa in both directions.
Yes, the SAID32X750-S is dimensionally interchangeable per ISO 15552. It shares the same mounting footprint and port sizes, making it a direct replacement for other ISO 15552 double-rod profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.