
The AirTAC SAID32 Double Rod Cylinder SAID32AX90 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X90 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 90mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on extension and retraction. This provides an equal push and pull force of 483 N at 0.7 MPa, ensuring perfectly symmetric motion control.
This configuration uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides, and the rear rod end can drive a secondary mechanism or position flag. It features PT tapered port threads and adjustable air cushions at both ends to decelerate the piston smoothly.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX90 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the extend and retract cycles must move identical 483 N loads at the exact same speed without requiring flow controls.
Twin rods exit both ends to guide a vertical slide, preventing torsional twist and ensuring precise linear movement without lateral drift.
Mounts a primary workpiece on the front rod and a secondary cam on the rear rod to actuate a separate pneumatic valve in sequence.
Select this 32mm bore when an application requires 483 N of force in both directions simultaneously, or when you need to step down from a 40mm bore (which outputs 739 N at 0.5 MPa) to save space. A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent the load from rotating, or when a rear cam is needed to trigger a limit switch. Note that this cylinder does not hold its position if air pressure is lost; for locking requirements, consider the SAIL or BSAID series.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other standard double-rod profile cylinders. It uses a G1/8 port and supports mounting accessories Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Since this model lacks the -S magnet option, it cannot host internal CMSE or DMSE sensors, so external limit switches must be driven by the rear rod.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR styles.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.