
The AirTAC SAID32 Double Rod Cylinder SAID32AX90S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X90-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 90mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on extend and retract. This means you get perfectly balanced force and speed in both directions, yielding 483N of thrust or pull at 0.5 MPa (345N at 0.5 MPa, 621N at 0.9 MPa).
Equipped with a -S magnet, this unit is ready for CMSE reed or DMSE electronic solid-state sensors mounted into the dual-side extruded barrel grooves. The rod is constructed from SUS420J2 stainless steel (code A) for enhanced corrosion resistance, and the fluid port utilizes a PT tapered thread. The rear rod extension can drive a secondary mechanism or carry a position flag while keeping the load guided against rotation.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX90S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one rod end while the opposite rod end moves a secondary linkage, utilizing the 483N both-direction force to maintain perfectly balanced motion.
The twin-rod architecture prevents the piston from twisting under offset loads, providing stable linear guidance for precision sliding fixtures.
Mounts a physical limit flag or cam on the rear rod extension to trigger external mechanical switches, while the -S magnet operates internal DMSE sensors.
Choose this 32mm bore when an application demands equal push and pull forces—such as 483N at 0.7 MPa—along with inherent anti-rotation guidance. If your mechanism requires less force, stepping down is not an option in the SAID series as 32mm is the smallest bore. If you need significantly more thrust, consider the 40mm bore, which provides 528N at 0.5 MPa. Select the SAID32X90-S over a single-rod SAI when you need to mount a cam or sensor flag on the rear rod, or when driving twin opposing stations. Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost. For position holding without live pressure, explore the SAIL or BSAID locking variants.
This cylinder is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders. Ensure you specify PT port threading and the -S magnet option for your AirTAC CMSE / DMSE switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable per ISO 15552. However, the SAID series uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR brackets found on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.