
The AirTAC SAID32 Double Rod Cylinder SAID32AX95S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X95-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 95mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on both sides, yielding exactly 483N of force at 0.5 MPa in both extend and retract directions. The -S suffix indicates an integrated magnet for position sensing.
This specific configuration utilizes a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. It features PT tapered port threads and adjustable air cushions at both ends to decelerate the piston smoothly. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount a rear-position flag or cam on the opposing rod end to trigger secondary mechanisms without interfering with the primary workpiece.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX95S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the equal 483N extend and retract force prevents jerky movements, ensuring smooth part shuttling between stations.
Mounts the primary workpiece on the front rod and a cam on the rear rod to trigger a secondary pneumatic valve mechanically mid-stroke.
Uses the twin-rod geometry to guide a vertical lifting slide, preventing rotational twist without needing external linear bearings.
Select this 32mm bore when an application demands equal push and pull forces (483N at 0.5 MPa) or requires anti-rotation guidance that a single-rod SAI cannot provide. If your mechanism needs less force, stepping down is not an option in this ISO profile series, but stepping up to a 40mm bore yields 528N both ways. This double-rod design is ideal for twin-station actuation or mounting a rear sensor flag. Remember that the adjustable cushion only decelerates the piston near stroke end; it does not hold the load. If air pressure is lost, the cylinder will drift, requiring an external pilot-operated check valve or a SAIL lock cylinder for position holding.
For a direct replacement, ensure the target matches the ISO 15552 mounting interface, 32mm bore, 95mm stroke, and PT port threads. The SAID series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting accessories, deliberately omitting the FB, CA, CB, and CR styles found on single-rod variants. The integrated magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extending and retracting.
Yes, the SAID32X95-S is dimensionally interchangeable per ISO 15552. Just verify your mounting style is compatible (Basic, FA, LB, TC, FTC, TCM1, or TCM2) and that you have sufficient rear clearance for the protruding secondary rod.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.