
The AirTAC SAID32 Double Rod Cylinder SAID32BX100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 100mm stroke. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on both sides, yielding exactly 345N of force in both extend and retract directions at 0.5 MPa. This symmetric output is ideal for mechanisms requiring consistent push and pull dynamics.
Beyond equal force, the twin-rod architecture provides superior anti-rotation stability and allows a rear rod end to drive a secondary mechanism or mount a position flag. The extruded aluminum barrel includes sensor grooves on both sides, and fluid is supplied via PT tapered G1/8 ports. It uses adjustable air cushions at both ends to decelerate the piston smoothly.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives loads requiring identical push and pull dynamics, utilizing the equal 345N annulus force in both directions for stable, balanced actuation.
The twin SUS304 rods guide the payload against rotational torque, maintaining precise alignment for sliding or clamping tasks.
Mounts a cam or position flag on the rear rod end to trigger external sensors, keeping the primary work area clear for operations.
Select this 32mm bore when an application demands perfectly matched extend and retract forces (345N at 0.5 MPa each way). If your mechanism requires less force, stepping down is not an option in this ISO 15552 series, but stepping up to a 40mm bore yields 528N both ways. Choose the SAID double-rod over a single-rod SAI when you need dual-side guidance, anti-rotation resistance, or rear-rod sensing. To match this cylinder, specify the 32mm bore, 100mm stroke, PT port thread, and your desired mounting accessory from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold the load. If air pressure is lost, the piston will drift. For position holding without live pressure, consider an external rod lock or a related SAIL locking cylinder.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers 345N of force in both the extend and retract directions at 0.5 MPa, and 621N at 0.9 MPa.
Yes, the SAID32X100 is dimensionally interchangeable per ISO 15552 and can serve as a direct replacement for other ISO 15552 double-rod cylinders, utilizing the standard mounting interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.