
The AirTAC SAID32 Double Rod Cylinder SAID32BX105 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X105 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 105mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding exactly 483 N of force in both directions at 0.7 MPa. This symmetric output is ideal for mechanisms requiring consistent push and pull dynamics.
This specific configuration utilizes a SUS304 stainless steel rod (material code B) for superior corrosion resistance, paired with PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting, though this unit is supplied without a magnet. You can mount a workpiece on the front rod end and a cam or position flag on the rear protrusion to trigger external limit sensors.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX105 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives transfer shuttles where the 483 N push and pull forces must be perfectly matched to maintain consistent cycle timing without recalibrating pressure valves.
Uses the twin-rod geometry to prevent piston rotation during vertical clamping, ensuring precise linear movement for light-duty assembly jigs.
Mounts the primary workpiece on the front rod and a mechanical cam on the rear protrusion to trip external mechanical limit valves during the 105mm stroke.
Select this 32mm bore when an application demands equal 483 N bi-directional force at 0.7 MPa, which is a step down from the 40mm bore that provides 739 N. A double-rod design is preferred over a single-rod SAI when you need twin-station actuation, enhanced anti-rotation guidance, or rear-rod sensing. For this 105mm stroke, side-load risks are minimal, but longer unsupported strokes require an external guide.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 double-rod cylinders. Ensure your setup uses the PT G1/8 ports and SAID-compatible mounting accessories (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that a plain SAID does not hold position if air pressure is lost; for locking requirements, consider the SAIL or BSAID series. Since this unit lacks the -S magnet, it cannot host internal CMSE or DMSE switches without modification.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
No, SAID uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. It is dimensionally interchangeable with other ISO 15552 double-rod profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.