
The AirTAC SAID32 Double Rod Cylinder SAID32BX115 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 115mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X115 is a double-acting, double-rod ISO 15552 profile cylinder engineered for tasks requiring equal push and pull dynamics. Because a SUS304 stainless steel rod exits both end covers, the effective piston area is identical in each direction, yielding a uniform 483 N of force at 0.7 MPa for extend and retract strokes.
This twin-rod architecture provides superior anti-rotation stability compared to a single-rod SAI. You can mount the primary workpiece on the front rod end and use the rear protrusion to carry a position flag, drive a secondary mechanism, or mount an opposing cam. The extruded aluminum barrel features dual-side sensor grooves, allowing you to install position switches without extra brackets.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX115 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a dual-sided transfer carriage where equal push and pull force ensures consistent acceleration regardless of travel direction.
Guides a precision vertical slide, using the twin rods to prevent mechanical twisting under offset loads.
Actuates a primary clamp on the front rod while the rear rod end mounts a physical flag for external limit detection.
Select this 32 mm bore when an application demands symmetric force and speed, as both directions output 483 N at 0.7 MPa. If your mechanism requires less force, stepping down is not an option below 32 mm in the SAID line, but stepping up to a 40 mm bore increases the both-way output to 739 N at 0.7 MPa. Choose the double-rod SAID over a single-rod SAI when you need dual-side guidance, rear-rod sensing, or strict anti-rotation control.
This cylinder uses PT tapered port threads and a G1/8 air supply. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If air pressure is lost, the piston will drift, requiring an external rod lock or a SAIL/BSAID variant for true position holding.
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X115 is dimensionally interchangeable per ISO 15552 profile cylinder standards. It serves as a direct replacement for other ISO 15552 double-rod cylinders, provided you account for the rear rod protrusion clearance.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.