
The AirTAC SAID32 Double Rod Cylinder SAID32BX115S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 115mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X115-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 115mm stroke. Because a stainless steel rod exits both ends, the annulus area is identical on each side, yielding perfectly symmetric performance. This design generates 483N of force in both extend and retract directions at 0.7 MPa, ensuring balanced motion control.
Equipped with a magnetic piston (-S), it supports precise position sensing via CMSE reed or DMSE electronic switches fitted into the dual sensor grooves. The SUS304 stainless rods provide excellent corrosion resistance, while the rear rod end offers a convenient mounting point for a cam or limit flag without interfering with the primary workpiece.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX115S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a secondary mechanism from the rear rod end while maintaining equal push and pull forces on the primary tooling.
The twin-rod geometry prevents piston rotation, guiding loads smoothly without needing external linear bearings.
Uses the rear protruding rod to mount a cam or flag, triggering DMSE electronic sensors from the back end.
Select this 32mm bore when an application requires exactly 483N of thrust both ways at 0.7 MPa, or step down if lower force is acceptable. A double-rod design is preferred over a single-rod SAI when you need anti-rotation guidance, twin-station actuation, or rear-end position sensing. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other standard double-rod cylinders.
This configuration includes a PT tapered port, a magnetic piston for CMSE/DMSE sensors, and SUS304 stainless rods. It supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without live air pressure is required, use an external rod lock or explore the BSAID clamp-lock series.
Quick checklist
Because the double-rod design has the same effective piston area on both sides, it provides 483N of force in both the extend and retract directions at 0.7 MPa.
Yes, it shares the exact ISO 15552 mounting interface and dimensions, making it a direct replacement for other standard ISO 15552 double-rod profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.