
The AirTAC SAID32 Double Rod Cylinder SAID32BX120 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 120mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X120 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 120mm stroke. Because a rod exits both ends, the annulus area is identical in each direction, yielding equal push and pull forces of 483 N at 0.7 MPa. This through-rod geometry provides superior anti-rotation guidance compared to a single-rod SAI.
This specific unit is configured with a SUS304 stainless steel rod (option B) for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount position switches independently on either end.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX120 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer arm where the extend and retract cycles must move identical payloads at the exact same speed and 345 N force.
Uses the protruding rear rod end to trip a mechanical limit switch or operate a secondary mechanism while the front rod drives the primary tool.
Keeps a precision sliding fixture guided and prevented from twisting under offset loads better than a single-rod cylinder.
Choose this 32mm bore when an application demands symmetric force and speed in both directions, generating 345 N at 0.5 MPa. If your mechanism requires less force, stepping down is not an option in this series, but stepping up to a 40mm bore increases the both-way output to 528 N at 0.5 MPa. The twin-rod design is ideal for driving twin-station loads or mounting a rear cam for secondary actuation. Note that a plain SAID does not hold position upon air loss; for locking requirements, consider the SAIL or BSAID series. As a true ISO 15552 cylinder, it drops in dimensionally with other ISO 15552 double-rod units.
For this 120mm stroke, side-load bending on the 12mm rod and rod bearing is moderate, but an external guide rail is still recommended if absorbing heavy lateral loads. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles found on single-rod variants.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers an equal force of 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both the extend and retract directions.
Yes, the SAID32X120 is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 double-rod profile cylinders, ensuring the PT port and 12mm rod thread match your setup.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.