
The AirTAC SAID32 Double Rod Cylinder SAID32BX135 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X135 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 135mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 483N of force in each direction at 0.5 MPa. This through-rod geometry provides superior anti-rotation guidance compared to a single-rod SAI.
This specific configuration utilizes a SUS304 stainless steel rod (option B) for enhanced corrosion resistance in harsh environments. It features PT tapered port threads and lacks a piston magnet. The extruded aluminum barrel includes sensor grooves on both sides, though electronic DMSE or reed CMSE switches require an -S magnet variant.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX135 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one side while the opposing rod end moves an identical secondary tool, ensuring balanced 483N force at 0.7 MPa in both directions.
The twin-rod architecture prevents piston twist during vertical lifting tasks, maintaining precise linear tracking without external linear bearings.
Uses the protruding rear rod to trip a mechanical limit switch or operate a secondary latch, keeping the primary 135mm stroke focused on the main payload.
Select this 32mm bore when an application demands symmetric force and speed, offering 345N each way at 0.5 MPa. If your mechanism requires less force, stepping down is not an option within the SAID range, but stepping up to a 40mm bore provides 528N both ways. Choose the double-rod layout over a single-rod SAI when you need to mount a position flag or cam on the rear rod extension, or when twin-side load guidance is critical.
For direct replacements, ensure the ISO 15552 mounting dimensions match your existing fixture. Compatible mounts include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (FB, CA, CB, and CR are omitted). Note that a plain SAID does not hold position unpowered; use a SAIL or BSAID if pneumatic locking is required. At 135mm stroke, side-load risks are moderate, but external guides are recommended for heavy off-center loads.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extension and retraction.
This specific model lacks a piston magnet, so it cannot host AirTAC CMSE reed or DMSE electronic sensors. You must select the -S magnet option for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.