
The AirTAC SAID32 Double Rod Cylinder SAID32BX140 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X140 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 140mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 345N of force at 0.5 MPa in both extend and retract directions.
This configuration includes SUS304 stainless steel rods (option B) for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel integrates sensor grooves on both sides, allowing you to mount a rear-position flag or cam on the secondary rod end for dual-side guidance.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX140 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Pushes and pulls a workpiece between two stations with identical 345N force, ensuring consistent timing in both directions without speed drift.
Uses the twin SUS304 rods to guide the load and prevent rotation, maintaining precise alignment for 140mm of travel without external guides.
Drives the primary workpiece on the front rod while using the rear rod end to trip a mechanical limit switch or secondary mechanism.
Select this 32mm bore when an application requires symmetric force and speed, stepping up from smaller actuators or down from a 40mm bore (which provides 528N at 0.5 MPa). A double-rod design is chosen over a single-rod SAI when the mechanism needs anti-rotation stability or a rear rod end to drive a secondary mechanism. Note that this cylinder does not hold its position if air pressure is lost; use a SAIL or BSAID variant if locking is required.
As a dimensionally interchangeable ISO 15552 cylinder, it uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Ensure you specify PT ports and add the -S magnet option if you require CMSE reed or DMSE electronic sensors.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It outputs 345N in both extend and retract directions at 0.5 MPa, and 621N both ways at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits the FB, CA, CB, and CR brackets used only on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.