
The AirTAC SAID32 Double Rod Cylinder SAID32BX145 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X145 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 145mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding exactly 483N of force in both directions at 0.7MPa. This symmetric output is ideal for mechanisms requiring consistent push and pull dynamics.
This variant is equipped with a SUS304 stainless steel double rod for superior corrosion resistance and utilizes PT tapered port threads (G1/8). The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Note that the rear rod protrusion requires additional clearance compared to a single-rod SAI cylinder.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX145 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer shuttle where the 345N force at 0.5MPa must be identical in both directions to maintain consistent cycle timing without adjusting pressure regulators.
Guides a vertical lifting slide using both rod ends to prevent torsional twist, leveraging the 12mm rod diameter for stable lateral support.
Actuates a secondary limit valve via a cam mounted on the rear rod protrusion, sequencing a downstream clamp without requiring external space for a separate sensor.
Select this 32mm bore model when an application demands equal push/pull forces of 483N at 0.7MPa alongside anti-rotation guidance. If your mechanism requires less force, stepping down is not an option in this series (32 is the minimum bore), but stepping up to a 40mm bore provides 739N. Choose the double-rod SAID over the single-rod SAI when you need to mount a cam or position flag on the rear rod extension, or when twin-side load guidance is critical.
For direct replacements, ensure the ISO 15552 mounting dimensions match your existing fixture. Compatible mounts include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (FB, CA, CB, and CR are excluded). Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost. For position holding without live pressure, consider an external rod lock or the SAIL series.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions due to the matching annulus areas. It provides 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa for both extend and retract strokes.
Yes, the SAID32X145 is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 double-rod profile cylinders, provided your mounting accessory is Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.