
The AirTAC SAID32 Double Rod Cylinder SAID32BX145S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X145-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 145mm stroke. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on each side, yielding perfectly symmetric thrust of 483N in both directions at 0.7 MPa. The integrated magnet (-S) enables precise position detection using CMSE reed or DMSE electronic switches housed within the dual sensor grooves.
This through-rod architecture is ideal when you need to mount the primary workpiece on one end and a mechanical cam, limit flag, or secondary tool on the rear. The PT tapered port threads ensure a robust pneumatic seal, while the extruded aluminum barrel maintains a lightweight yet rigid structure that is dimensionally interchangeable per ISO 15552.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX145S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a dual-sided indexing mechanism where the 483N pull and push forces must be perfectly matched to prevent bias in a precision assembly station.
Powers a linear slide carriage using the twin SUS304 rods to guide the load, preventing torsional twist without requiring external guide rails.
Mounts the primary tool on the front rod while the rear rod protrudes to drive a secondary mechanical cam or trigger a DMSE electronic sensor.
Select this 32mm bore when an application demands equal extend and retract forces—such as 345N at 0.5 MPa—along with superior anti-rotation guidance that a single-rod SAI cannot provide. If your mechanism requires less force, stepping down is not an option in this series, but stepping up to a 40mm bore (528N at 0.5 MPa) is the logical choice if margins are tight. Remember that a plain SAID does not hold position when air is lost; for dead-load holding, consider an external rod lock or the BSAID clamp-lock variant.
As a direct replacement for other ISO 15552 double-rod cylinders, you must match the 32mm bore, 145mm stroke, PT port threads, and the -S magnet requirement. Mounting accessories are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is 145mm, the unsupported rod length is moderate, but always ensure the rear rod has adequate clearance for its full protrusion.
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It delivers an equal force of 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both the extend and retract directions.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. However, the SAID series supports a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits FB, CA, CB, and CR brackets found on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.