verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX15

The AirTAC SAID32 Double Rod Cylinder SAID32BX15 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 15mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke15 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$65.86 $74.00Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX15

The AirTAC SAID32X15 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 15mm stroke. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on extend and retract. This yields equal push and pull force, delivering 345 N each way at 0.5 MPa.

The twin-rod architecture allows mounting a workpiece on the front rod end while using the rear extension for a cam or position flag. It utilizes PT tapered port threads (G1/8) and includes adjustable air cushioning at both ends to decelerate the piston smoothly.

Airtac SAID32 Double Rod Cylinder SAID32BX15 Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX15
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke15 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX15

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×15Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX15 Is Used

sync_alt

Symmetric Force Transfer

Drives a lightweight clamping jaw where the 345 N extend and retract forces must be perfectly matched to avoid biasing the workpiece during operation.

straighten

Anti-Rotation Slides

The twin SUS304 rods guide the load against rotation, ideal for short 15mm stroke pick-and-place heads that cannot tolerate torsional play.

settings_input_component

Rear-Rod Sensing

Mounts the primary tool on the front rod while the rear extension carries a physical limit flag to trigger a remote mechanical switch.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX15 the Right Cylinder?

Select this 32mm bore when an application demands 345 N of symmetric force both ways at 0.5 MPa. If your mechanism requires less thrust, stepping down is not an option as 32mm is the minimum size, but stepping up to the 40mm bore provides 528 N both ways. Choose the double-rod SAID over a single-rod SAI when you need dual-side guidance, anti-rotation stability, or rear-rod sensing.

This cylinder uses a PT port thread and a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. Note that a plain SAID does not hold its position if air pressure is lost; for locking requirements, consider the SAIL or BSAID series. It is dimensionally interchangeable per ISO 15552.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX15 FAQ

Because it is a double-rod cylinder, the effective piston area is the same in both directions. It provides an equal push and pull force of 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.

Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not use the FB, CA, CB, or CR brackets found on single-rod models.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX15

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32BX15 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.