
The AirTAC SAID32 Double Rod Cylinder SAID32BX155 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X155 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 155mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding equal push and pull forces. This specific bore generates 345N of thrust and retraction force at 0.5MPa, scaling to 621N at 0.9MPa.
This unit is configured with SUS304 stainless steel rods (option B) for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. You can mount a workpiece on the front rod end and a cam or position flag on the rear protrusion to trigger external sensors.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX155 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece forward and backward with identical 483N force at 0.7MPa, ensuring consistent cycle timing in precision assembly tasks.
The twin-rod design inherently resists torsional rotation, providing stable linear guidance for pick-and-place heads without external guides.
Mounts the primary tool on the front rod and a cam flag on the rear protrusion to actuate external limit switches for precise end-position verification.
Select this 32mm bore when an application demands symmetric force and speed in both directions, offering 345N each way at 0.5MPa. If your mechanism requires less force, stepping down is not an option in the SAID range, but stepping up to a 40mm bore provides 528N both ways. Choose the double-rod SAID over a single-rod SAI when you need dual-side guidance to prevent rotation, or require a rear rod extension for secondary actuation. Note that a plain SAID does not hold position if air pressure is lost; for locking needs, consider the SAIL or BSAID series.
For a direct replacement, ensure the ISO 15552 mounting dimensions match your existing fixture. Compatible mounting accessories include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since this 155mm stroke is below the 300mm threshold, side-load stress on the rod bearing is moderate, but external guidance is still recommended for heavy lateral loads.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa for both extension and retraction.
Yes, the SAID32X155 is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting footprint as other standard profile cylinders, though it uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.